The steam generator switches on and then off – what should I do?
Does your steam generator switch on and then switch off straight away? There’s nothing more frustrating when you’re ready to tackle your pile of laundry! This fault can have various causes: some minor, others more serious. Don’t worry! Read on to find out the possible causes of this fault and how to fix it effectively.
THE CAUSES OF THIS FAULT:
-
Faulty power supply
-
On/off switch out of service
-
Faulty heater
-
Thermostat fault
-
Faulty circuit board
WARNING
Before carrying out any work on your appliance, please ensure that you unplug it from the mains.
Risk of electric shock.
Make sure you wear suitable gloves if you are carrying out the dismantling
Risk of cuts.
A problem with the power supply
One of the most common reasons is an unstable power supply. This may be due to a faulty socket. To do this, try plugging your steam generator into a different socket to remove this option. The power cable may also be damaged. Check the power cord for identify the cuts or damaged areas. If it is in poor condition, it will need to be replaced.
The on/off button is damaged
Most steam generators are equipped with a on/off switch. It may be that, over time, this causes loose connections or no longer engages at all. A faulty on/off switch can also cause the machine to shut down unexpectedly because it can no longer maintain a proper electrical connection. Test the switch and replace it if necessary.
Buy a new switch for my steam generator
The heating element is dirty or faulty
A build-up of limescale on the heating element can interfere with the heating process and cause the appliance to shut down immediately. This is particularly common if the water used is not demineralised. Remove and descale the heating element if possible, using a suitable descaling agent. If it is too badly damaged, you will need to replace the part.
Buy a new heating element for my steam generator
A fault with the thermostat or the thermal safety device
The steam generator is fitted with a thermostat or a thermal protection to prevent overheating. If these components are faulty, the appliance may switch itself off automatically as a safety measure. Have the thermostat checked and replace it if necessary.
Buy a thermostat for my steam generator
The circuit board is faulty
The circuit board controls the various functions of the steam generator. If it is damaged, the appliance may switch on briefly and then switch off. Once you have ruled out all other possible causes of the fault, you will probably need to replace this part to repair your iron.
Buy a circuit board for my steam generator
Je cherche un autre diagnostic...
J'ai trouvé ma panne et commandé ma pièce ! Mais comment réparer ?
Vous venez de trouver l’origine de la panne de votre appareil, vous avez commandé la pièce compatible, mais maintenant qu’il faut réparer, une question se pose : Mais comment je fais maintenant ?
Ne vous inquietez pas ! Nous vous proposons un large catalogue de tutoriels écrits dans l’objectif de réussir votre auto-réparation. Vous pouvez également retrouver nos tutoriels vidéos sur notre chaîne YouTube SOS Accessoire !
Panne non trouvée ?
Trouvons ensemble la cause du dysfonctionnement de votre appareil en quelques minutes par visio... ainsi que le moyen de le réparer !
Questions et commentaires sur cette astuce